Flowcrete Flowprime 14.1Kg

Description

Flowcrete Flowprime – 2-component low viscosity epoxy resin primer

Flowcrete Flowprime – 2-component low viscosity epoxy resin primer. For priming of concrete and screeds, prior to overcoating with resin toppings e.g. Flowshield SL, Flowtex, Mondéco Earth etc.

Uses

Application temperature

The recommended substrate temperature is 15 – 25°C, but no less than 10°C. The temperature of the substrate should exceed the “dew point” by 3°C during application and hardening. Temperatures should not fall below 5°C in the 24hrs after application.

Application time/pot life

Ready-mixed product should be used within 40 minutes at a temperature of 20°C. At higher temperatures, the application time is shorter.

Curing time (at 20°C)

Can be overcoated after 12 hours. Maximum overcoat time 24 hours. The product is fully hardened after 5 – 7 days. High humidity in early stages of cure can result in white, matt surfaces (blooming). Resin screeds/mortars can be applied into wet or tacky primer or, if they are to be applied onto a tack free primer, a sand scatter should be applied to ensure the mortar does not slip during compaction.

Colour

Transparent

Not quite what you’re looking for? View more of our Flowcrete/Isocrete range.

Want to see how Flowcrete Flowprime and other Flowcrete/Isocrete products have been used?  View a range of Flowcrete/Isocrete Projects.