DCP Strongcoat Primer

Description

DCP Strongcoat Primer is a two-pack, solvent-free epoxy-based primer for use with the DCP range of surface coatings and toppings.

DCP Strongcoat Primer is used as a prime coat to aid improving adhesion of subsequent epoxy layers. One or two coats should be applied depending on the texture, porosity and evenness of the surface being primed.

Ensure that all pinholes and grooves in the prepared substrate are properly filled using suitable epoxy putty materials prior to the application of subsequent layers.
This is crucial to prevent pinhole reflection and to achieve a smooth, seamless finish.
The surface must be clean, dry and free from dust, laitance, oils, paints or other forms of contamination. Grit blasting can be used to remove laitance and surface contamination (see the Guide to Surface Preparation for further details).
For treatment of surfaces containing expansion joints consult the DCP Technical Department.

Once mixing is complete, transfer the Strongcoat Primer to a roller tray and, using a medium-pile simulated sheepskin roller, apply it evenly over the surface.

Strongcoat Primer must be overlaid no later than 24 hours after it has cured (see Curing Time). Additionally, it must not be contaminated prior to being overlaid.

Avaliable in 5Kg,10Kg and 20Kg Kits