Ardex Arditex CL Plus+

Description

Ardex Arditex CL Plus+ Fibre Reinforced Moisture Tolerant Levelling and Smoothing Compound

Features
• Install floorcoverings after as little as 8 hours
• Outstanding flow and application properties
• Can be used over old adhesive residues including bitumen
• No priming required on most floors, including bitumen adhesive residues, ARDEX Damp Proof Membranes and ceramic tiles
• Moisture tolerant, can be used under an ARDEX Damp Proof Membrane and direct to damp concrete
• Feather edge to 10mm in one application
• Apply up to 30mm incorporating ARDEX Coarse Aggregate
• Suitable for use on floors with underfloor heating

For levelling and smoothing most common internal subfloors such as concrete, cement/sand and gypsum (anhydrite) screeds, flooring grade plywood,
ceramic tiles, bitumen and flooring grade asphalt. Ardex Arditex CL Plus+ can be laid from a feathered edge up to 10mm in a single application or up to 30mm by incorporating ARDEX Coarse Aggregate.

NOTE: Ardex Arditex CL Plus+ should not be used on top of rubber, linoleum, cork or moisture sensitive floorcoverings.

Coverage

A unit of ARDITEX CL PLUS+ will cover approximately 4.1m² at 3mm thick. The coverage figure is based on a flat level surface, and additional material should be allowed for where the surface is
rough or uneven.