Ardex A125 Smoothing and Finishing Render – 22Kg Bag

Description

Ardex A125 – Smoothing & Finishing Render

Ardex A125 – Smoothing & Finishing Render. Ardex A125 is a grey, cement-based, fine coat finishing render, fairing coat and fine repair mortar. Suitable for the rapid repair of many types of surface imperfections, voids and damage. It is mixed with water to produce an easily-worked, slump-free mortar which dries to a hard wearing, water and weather resistant finish, with a smooth, dense surface suitable for painting.

Material requirement is approximately 1.4kg of Ardex A125 powder per m2 per millimetre thickness i.e. approximately 5m2 at 3mm thick per bag.

Smoothing & Finishing  Uses

Ardex A125 can be used for levelling and smoothing over surface irregularities on vertical and overhead backgrounds such as concrete, brickwork, blockwork and previously applied cement/sand renders. Finishes to a smooth wearing surface that can be left exposed and is also suitable to receive paints and other cement-resistant decorative coatings. It is suitable for internal and external use, and is an ideal solution for areas subject to moisture, such as swimming pool halls and underground tunnels.

NOTE: Low strength backgrounds such as lime/sand renders are not suitable surfaces to apply Ardex A125.

Not quite what you’re looking for? Further information can be found on our Help and News pages by following this link.  Click here to browse more of our Ardex range.

Want to see how Ardex A125 and other Ardex products have been used? Click here to view a range of Ardex Projects.