DCP Cemflow Primer

Description

DCP Cemflow Primer is a single component polymeric primer designed to promote the adhesion of cement based levelling compounds. It is also used as a pore sealer on absorbent surfaces to prevent air release from the subfl oor, which can cause pin – holing on the surface of the applied floor topping.

DCP Cemflow Primer also offers excellent water resistance, durability and adhesion.

COVERAGE
Diluted 5:1 30m²/litre
Diluted 3:1 20m²/litre

PREPARATION
Floor surfaces must be sound, dry and free from contaminants that may prevent adhesion. Concrete and sand/cement screeds must be fully cured. Substrates should be mechanically prepared by bush hammering, grit blasting, steam cleaning etc. to produce a clean exposed aggregate finish, free of all dust, oil, grease, paint, etc.
The temperature of the surface must be maintained above 10°C prior to its application. Underfloor heating must be switched off 48 hours before, during and after application.

APPLICATION
Dilute CEMFLOW PRIMER should be applied evenly to the prepared surface either by brush, roller or spray method and allowed to dry before application of a floor topping.